个人工具

“ZabbixManual1.4/ZabbixProcesses”的版本间的差异

来自Ubuntu中文

跳转至: 导航, 搜索
第381行: 第381行:
 
==== Usage ====
 
==== Usage ====
  
zabbixw32 [options] [command]
+
Command line syntax:
  ZABBIX Windows Agent accepts the following command line parameters:
+
  check-config Check configuration file and exit.
+
  help Display help information.
+
  install Install ZABBIX Win32 Agent as a service.
+
  install-events Install ZABBIX Win32 Agent as event source
+
  for Event Log. This is done automatically
+
  when service is being installed.
+
  remove Remove previously installed ZABBIX Win32
+
  Agent service.
+
  remove-events Remove ZABBIX Win32 Agent event source.
+
  This is done automatically when service is
+
  being removed.
+
  standalone Run in standalone mode.
+
  start Start ZABBIX Agent service.
+
  stop Stop ZABBIX Agent service.
+
  version Display version information.
+
  And possible options are:
+
  --config <file> Specify alternate configuration file (default is
+
  c:\zabbix_agentd.conf).
+
  The file contains configuration parameters for ZabbixW32. Supported
+
  parameters:
+
  Parameter Mandatory Default value Description
+
  No - Sets the alias for parameter.
+
  Alias
+
  It can be useful to substitute
+
  long and complex parameter
+
  name with a smaller and
+
  simpler one. For example, if
+
  you wish to retrieve paging
+
  file usage in percents from
+
  the server, you may use
+
  parameter
+
  
  "perf_counter[\Paging
+
  zabbix_agentd.exe [-Vhp] [-idsx] [-c <file>] [-t <metric>]
  File(_Total)\% Usage]", or
+
 
  you may define an alias by
+
ZABBIX Windows Agent accepts the following command line parameters:
  adding the following line to
+
 
  configuration file: Alias =
+
'''Options:'''
  pg_usage:perf_counter[\Pagi
+
 
  ng File(_Total)\% Usage]
+
-c --config <file> Specify alternate configuration file (default is c:\zabbix_agentd.conf).
  After that you can use
+
-h --help Display help information.
  parameter name "pg_usage"
+
-V --version Display version number.
  to retrieve the same
+
-p --print Print list of supported checks (metrics) and exit.
  information. You can specify
+
-t --test <metric> Test single check (metric) and exit.
  as many "Alias" records as
+
 
  you wish. Please note that
+
'''Functions:'''
  aliases cannot be used for
+
 
  parameters defined in
+
-I --install Install ZABBIX agent as a service.
  "PerfCounter" configuration
+
-d --uninstall Uninstall ZABBIX agent service.
  file records.
+
-s --start Start ZABBIX agent service.
  No - The parameter has no effect.
+
-x --stop Stop ZABBIX agent service.
  DebugLevel
+
 
  No - Use this parameter to include
+
The file contains configuration parameters for Zabbix_agentd.exe. Supported parameters: <br>
  Include
+
 
  a file into the configuration
+
<br>
  file. Number of parameters
+
 
  Include is not limited.
+
{| width="100%" cellspacing="1" cellpadding="1" border="1"
  For example:
+
|-
  Include=c:\user_parameters.
+
| Parameter
  conf
+
| Mandatory
  No 10050 Port number to listen.
+
| Default value
  ListenPort
+
| Description
  No - Name of log file. If not set,
+
|-
  LogFile
+
| Alias
  syslog is used.
+
| No
  No - Controls logging of
+
| -<br>
  LogUnresolvedS
+
| Sets the alias for parameter. It can be useful to substitute long and complex parameter name with a smaller and simpler one. For example, if you wish to retrieve paging file usage in percents from the server, you may use parameter "perf_counter[\Paging File(_Total)\% Usage]", or you may define an alias by adding the following line to configuration file: Alias = pg_usage:perf_counter[\Pagi ng File(_Total)\% Usage] After that you can use parameter name "pg_usage" to retrieve the same information. You can specify as many "Alias" records as you wish. Please note that aliases cannot be used for parameters defined in "PerfCounter" configuration file records.
  unresolved symbols during
+
|-
  ymbols
+
| DebugLevel
  agent startup. Values can be
+
| No<br>
  strings ‘yes’ or ‘no’ (without
+
| 3<br>
  quotes).
+
|
  No 100 Sets maximum acceptable
+
Debug level, one of
  MaxCollectorPro
+
 
  processing time of one data
+
0 – none
  cessingTime
+
 
  sample by collector thread (in
+
1 – critical
  milliseconds). If processing
+
 
  time will exceed specified
+
2 – errors
  value, warning message will
+
 
  be written to the log file.
+
3 – warnings
  No - The parameter has no effect.
+
 
  NoTimeWait
+
4 – debug
  No - &lt;parameter_name&gt;,"&lt;perf_c
+
 
  PerfCounter
+
|-
  ounter_path&gt;",&lt;period&gt;
+
| Include
  Defines new parameter
+
| No
  &lt;parameter_name&gt; which is
+
| -
  Parameter Mandatory Default value Description
+
| Use this parameter to include a file into the configuration file. Number of parameters Include is not limited. For example: Include=c:\user_parameters. conf
  an average value for system
+
|-
  performance counter
+
| ListenPort
  &lt;perf_counter_path&gt; for the
+
| No
  specified time period
+
| 10050
  &lt;period&gt; (in seconds).
+
| Port number to listen.
  For example, if you wish to
+
|-
  receive average number of
+
| LogFile
  processor interrupts per
+
| No
  second for last minute, you
+
| -
  can define new parameter
+
| Name of log file. If not set, syslog is used.
  "interrupts" as following:
+
|-
  PerfCounter =
+
| LogUnresolvedSymbols
  interrupts,"\Processor(0)\Inter
+
| No
  rupts/sec",60
+
| -
  Please note double quotes
+
| Controls logging of unresolved symbols during agent startup. Values can be strings ‘yes’ or ‘no’ (without quotes).
  around performance counter
+
|-
  path. Samples for calculating
+
| MaxCollectorProcessingTime
  average value will be taken
+
| No
  every second.
+
| 100
  No - The parameter has no effect.
+
| Sets maximum acceptable processing time of one data sample by collector thread (in milliseconds). If processing time will exceed specified value, warning message will be written to the log file.
  PidFile
+
|-
  Yes - Comma-delimited list of IP
+
| NoTimeWait
  Server
+
| No
  addresses of ZABBIX
+
| -
  servers. Connections from
+
| The parameter has no effect.
  other IP addresses will be
+
|-
  rejected.
+
| PerfCounter
  No - The parameter has no effect.
+
| No
  StartAgents
+
| -
  No - User-defined parameter to
+
|
  UserParameter
+
&lt;parameter_name&gt;,"&lt;perf_c ounter_path&gt;",&lt;period&gt; Defines new parameter &lt;parameter_name&gt; which is an average value for system performance counter &lt;perf_counter_path&gt; for the specified time period &lt;period&gt; (in seconds).
  monitor. There can be
+
 
  several user-defined
+
For example, if you wish to receive average number of processor interrupts per second for last minute, you can define new parameter "interrupts" as following:
  parameters. Value has form
+
 
  &lt;key&gt;,&lt;shell command&gt;. Do
+
PerfCounter = interrupts,"\Processor(0)\Inter rupts/sec",60
  not use spaces around pipe
+
 
  ('|') characters!
+
Please note double quotes around performance counter path. Samples for calculating average value will be taken every second.
  Example:UserParameter=test
+
 
  ,echo 1
+
You may run typeperf –qx to get list of all performance counters available in Windows.
 +
 
 +
|-
 +
| PidFile
 +
| No
 +
| -
 +
| The parameter has no effect.
 +
|-
 +
| Server
 +
| Yes
 +
| -
 +
| Comma-delimited list of IP addresses of ZABBIX servers. Connections from other IP addresses will be rejected.
 +
|-
 +
| StartAgents
 +
| No
 +
| -
 +
| The parameter has no effect.
 +
|-
 +
| UserParameter
 +
| No
 +
| -
 +
| ') characters! Example:UserParameter=test ,echo 1
 +
|}
  
 
=== ZABBIX Sender (UNIX) ===
 
=== ZABBIX Sender (UNIX) ===

2008年4月3日 (四) 14:38的版本

ZABBIX Processes

ZABBIX Server

ZABBIX Server is a central process of ZABBIX software. ZABBIX Server can be started by executing:

shell> cd bin
shell> ./zabbix_server

ZABBIX Server runs as a daemon process.

ZABBIX Server accepts the following command line parameters:

-c --config <file> specify configuration file, default is /etc/zabbix/zabbix_server.conf
-h --help give this help
-v --version display version number

In order to get this help run:

shell> zabbix_server -h

Example of command line parameters:

shell> zabbix_server –c /usr/local/etc/zabbix_server.conf
shell> zabbix_server --help
shell> zabbix_server -v

The configuration file contains parameters for zabbix_server. The file must exist and it should have read permissions for user ‘zabbix’. Supported parameters:

Parameter Mandatory Default value Description
AlertScriptsPath No /home/zabbix/bin Location of scripts for user-defined media types.
DBHost Yes - Database name. Usually ‘zabbix’.
DBName Yes - Database name. Usually ‘zabbix’.
DBSocket No - DB socket name. Used for non-TCP connection to MySQL database. Example: /tmp/mysql.sock
DBPassword No NULL Database password. If password is not used, then this parameter must be commented.
DBUser No NULL User name for connecting to the database.
DebugLevel No 3 Debug level, one of

0 – none 1 – critical 2 – errors 3 – warnings 4 – debug

DisableHousekeeping No 0 If set to 1, housekeeper will be disabled.
ExternalScripts No /etc/zabbix/exter Location of scripts for external checks.
FpingLocation No /usr/sbin/fping Location of ICMP pinger. It must have setuid flag set.
HousekkepingFrequency No 1 The parameter defines how often the daemon must perform housekeeping procedure (in hours). If PostgreSQL is used set the value to 24 as it will perform command VACUUM.
Include No - Use this parameter to include a file into the configuration file. Number of parameters Include is not limited.

For example: Include=/etc/zabbix/db_conn.conf

ListenIP No - Interface to listen by trapper processes. Trapper will listen to all interfaces if this parameter is not set.
ListenPort No 10051 Port number to listen by trapper processes.
LogFile No - Name of log file. If not set, syslog is used.
LogFileSize No 1 This parameter controls log rotation setting for LogFile.By default, ZABBIX automatically roatates log file when it reaches 1MB.This parameter is in MB.If set to 0, no log rotation will be performed.
NodeID No 0 Unique NodeID (0-999). Must be ‘0’ or missing for standalone ZABBIX Server.
PidFile No /tmp/zabbix_server.pid Name of file to store PID
PingerFrequency No 30 ZABBIX server ping serversonce per PingerFrequency seconds (1-3600).
SenderFrequency No 30 The parameter defines how often the daemon must try to send alerts (in seconds)
StartDiscoverers No 1 Number of discoverers to start (0-255).
StartHTTPPollers No 5 Number of HTTP pollers to start (0-255).
StartPollers No 5 Number of pollers to start (0-255).
StartPollersUnreachable No 1 Number of pollers forunreachable hosts to start (0-255).
StartTrappers No 5 Number of trappers to start (0-255)
Timeout No 5 Do not spend more than Timeout seconds on retrieving requested value (1-255) Note: Example of the configuration file can be found at misc/conf/zabbix_server.conf
TrapperTimeout No 5 Do not spend more than Timeout seconds on processing of traps (1-255)
UnavailableDelay No 60 How ofter try to connect to unavailable host
UnreachableDelay No 15 How often try to connect to unreachable host
UnreachablePeriod No 45 If a host was unreachable for more than UnreachablePeriod seconds,change host status to Unavailable

ZABBIX Agent (UNIX, standalone daemon)

ZABBIX UNIX Agent runs on a host being monitored. The agent provides host's performance and availability information for ZABBIX Server.

ZABBIX Agent processes items of type ‘ZABBIX Agent’ or ‘ZABBIX Agent (active)’.

ZABBIX Agent can be started by executing:

shell> cd bin
shell> ./zabbix_agentd

ZABBIX Agent runs as a daemon process.

ZABBIX Agent accepts the following command line parameters:

-c --config <file> specify configuration file, default is /etc/zabbix/zabbix_agentd.conf
-h --help give this help
-v --version display version number
-p --print print supported metrics and exit
-t --test <metric> test specified metric and exit

In order to get this help run:

shell> zabbix_agentd –h

Example of command line parameters:

shell> zabbix_agentd –c /usr/local/etc/zabbix_agentd.conf
shell> zabbix_agentd –help
shell> zabbix_agentd –print
shell> zabbix_agentd –t “system.cpu.load[all,avg1]”

The configuration file contains configuration parameters for zabbix_agentd. The file must exist and it should have read permissions for user ‘zabbix’. Supported parameters:

Parameter Mandatory Default value Description
DebugLevel No 3 Debug level:

0 – none 1 – critical 2 – errors 3 – warnings 4 – debug

DisableActive No 0 Disable processing of active checks. The agent will not connect to ZABBIX server to get list of active items.
EnableRemoteCommands No 0 Enable remote commands. ZABBIX server will be able to send commands for execution by the agent.
Hostname No System’s Unique host name. The hostname. hostname is used for active checks only.
Include No - Use this parameter to include a file into the configuration file. Number of parameters Include is not limited.For example: Include=/etc/zabbix/user_parameters.conf
ListenIP No - IP address to bind agent to. Useful if the host has multiple interfaces.
ListenPort No 10050 Port number to listen.
LogFile No - Name of log file. If not set, syslog is used.
LogFileSize No 1 This parameter controls log rotation setting for LogFile.By default, ZABBIX automatically roatates log file when it reaches 1MB. This parameter is in MB. If set to 0, no log rotation will be performed.
PidFile /tmp/zabbix_agentd.pid Name of PID file.
RefreshActiveChecks No 120 The agent will refresh list of active checks once per 120 (default) seconds.
Server Yes - Comma-delimited list of IP addresses of ZABBIX servers. Connections from other IP addresses will be rejected.
ServerPort No 10051 The agent will connect to this server port for processing active checks.
StartAgents No 5 Number of agents to start.
Timeout No 3 Do not spend more that Timeout seconds on getting requested value (1-255). The agent does not kill timeouted User Parameters processes!
UserParameter No - wc -l Note: Example of the configuration file can be found at misc/conf/zabbix_agentd.conf.

ZABBIX Agent (UNIX, Inetd version)

The file contains configuration parameters for zabbix_agent. The file must exist and it should have read permissions for user ‘zabbix’. Supported parameters:

Parameter Mandatory Default value Description
Server Yes - Comma-delimited list of IP addresses of ZABBIX servers. Connections from other IP addresses will be rejected.
Timeout No 3 Do not spend more that Timeout seconds on getting requested value (1-255). The agent does not kill timeouted User Parameters processes!
UserParameter No - User-defined parameter to monitor. There can be several user-defined parameters.

Example:UserParameter=use rs,who|wc -l

Note: Example of the configuration file can be found at misc/conf/zabbix_agent.conf

ZABBIX Agent (Windows)

ZabbixW32 is ZABBIX agent for Win32 systems. It will work on Windows NT 4.0, Windows 2000, Windows XP, and Windows Vista.

Installation

Installation is very simple and includes 3 steps:

Step 1 Create configuration file.

Create configuration file c:/zabbix_agentd.conf (it has the same syntax as UNIX agent).

Step 2 Install agent as a Windows service.

ZabbixW32.exe --install

If you wish to use configuration file other that c:\zabbix_agentd.conf, you should use the following command for service installation:

ZabbixW32.exe --config <your_configuration_file> install

Full path to configuration file should be specified.

Step 3 Run agent.

Now you can use Control Panel to start agent's service or run:

ZabbixW32.exe start

Windows NT 4.0 note. ZabbixW32 uses PDH (Performance Data Helper)

Note:
 API to gather various system information, so PDH.DLL is needed. This DLL is not supplied with Windows NT 4.0, so you need to download and
 install it by yourself. Microsoft Knowledge Base article number 284996 describes this in detail and contains a download link. You can find this
 article at http://support.microsoft.com/default.aspx?scid=kb;en-us;284996

Usage

Command line syntax:

zabbix_agentd.exe [-Vhp] [-idsx] [-c <file>] [-t <metric>]

ZABBIX Windows Agent accepts the following command line parameters:

Options:

-c --config <file> Specify alternate configuration file (default is c:\zabbix_agentd.conf).
-h --help Display help information.
-V --version Display version number.
-p --print Print list of supported checks (metrics) and exit.
-t --test <metric> Test single check (metric) and exit.

Functions:

-I --install Install ZABBIX agent as a service.
-d --uninstall Uninstall ZABBIX agent service.
-s --start Start ZABBIX agent service.
-x --stop Stop ZABBIX agent service.

The file contains configuration parameters for Zabbix_agentd.exe. Supported parameters:


Parameter Mandatory Default value Description
Alias No -
Sets the alias for parameter. It can be useful to substitute long and complex parameter name with a smaller and simpler one. For example, if you wish to retrieve paging file usage in percents from the server, you may use parameter "perf_counter[\Paging File(_Total)\% Usage]", or you may define an alias by adding the following line to configuration file: Alias = pg_usage:perf_counter[\Pagi ng File(_Total)\% Usage] After that you can use parameter name "pg_usage" to retrieve the same information. You can specify as many "Alias" records as you wish. Please note that aliases cannot be used for parameters defined in "PerfCounter" configuration file records.
DebugLevel No
3

Debug level, one of

0 – none

1 – critical

2 – errors

3 – warnings

4 – debug

Include No - Use this parameter to include a file into the configuration file. Number of parameters Include is not limited. For example: Include=c:\user_parameters. conf
ListenPort No 10050 Port number to listen.
LogFile No - Name of log file. If not set, syslog is used.
LogUnresolvedSymbols No - Controls logging of unresolved symbols during agent startup. Values can be strings ‘yes’ or ‘no’ (without quotes).
MaxCollectorProcessingTime No 100 Sets maximum acceptable processing time of one data sample by collector thread (in milliseconds). If processing time will exceed specified value, warning message will be written to the log file.
NoTimeWait No - The parameter has no effect.
PerfCounter No -

<parameter_name>,"<perf_c ounter_path>",<period> Defines new parameter <parameter_name> which is an average value for system performance counter <perf_counter_path> for the specified time period <period> (in seconds).

For example, if you wish to receive average number of processor interrupts per second for last minute, you can define new parameter "interrupts" as following:

PerfCounter = interrupts,"\Processor(0)\Inter rupts/sec",60

Please note double quotes around performance counter path. Samples for calculating average value will be taken every second.

You may run typeperf –qx to get list of all performance counters available in Windows.

PidFile No - The parameter has no effect.
Server Yes - Comma-delimited list of IP addresses of ZABBIX servers. Connections from other IP addresses will be rejected.
StartAgents No - The parameter has no effect.
UserParameter No - ') characters! Example:UserParameter=test ,echo 1

ZABBIX Sender (UNIX)

ZABBIX UNIX Sender is a command line utility which may be used to send performance data to ZABBIX Server for processing.

The utility is usually used in long running user scripts for periodical sending of availability and performance data.

ZABBIX Sender can be started by executing:

shell> cd bin
 shell> ./zabbix_sender –z zabbix –p 10051 –h LinuxDB3 –k db.connections –o 43

ZABBIX Sender accepts the following command line parameters:

-z --zabbix-server <zabbix server> Hostname or IP address of ZABBIX Server.
-p --port <zabbix server port> Specify port number of server trapper running on the server. Default is 10051.
-s --host <host name or IP> Specify host name or IP address of a host.
-k --key <key of metric> Specify metric name (key) we want to send.
-o --value <value> Specify value of the key.
-i --input-file <input file> Load values from input file.
-h –help Give this help.
-v –version Display version number.

In order to get this help run:

shell> zabbix_sender -h

ZABBIX Get (UNIX)

ZABBIX UNIX Get is a process which communicates with ZABBIX Agent and retrieves required information.

The utility is usually used for troubleshooting of ZABBIX Agents.

ZABBIX Get can be started by executing:

shell> cd bin
shell> ./zabbix_get -s127.0.0.1 -p10050 -k"system.cpu.load[all,avg1]"

ZABBIX Get accepts the following command line parameters:

-p --port <port number> Specify port number of agent running on the host, Default is 10050
 -s --host <host name or IP> Specify host name or IP address of a host. 
 -k --key <key of metric> Specify metric name (key) we want to retrieve.
 -h --help Give this help.
 -v --version Display version number.

In order to get this help run:

shell> zabbix_get -h