“UbuntuHelp:WifiDocs/Driver/bcm43xx/Gutsy”的版本间的差异
来自Ubuntu中文
小 （新页面: {{From|https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Gutsy}} {{Languages|UbuntuHelp:WifiDocs/Driver/bcm43xx/Gutsy}} == Broadcom Wireless in Ubuntu 7.10 (Gutsy) == The Linu...） |
小 |
||
| 第1行： | 第1行： | ||
{{From|https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Gutsy}} | {{From|https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Gutsy}} | ||
{{Languages|UbuntuHelp:WifiDocs/Driver/bcm43xx/Gutsy}} | {{Languages|UbuntuHelp:WifiDocs/Driver/bcm43xx/Gutsy}} | ||
| − | |||
| − | |||
| − | |||
== Broadcom Wireless in Ubuntu 7.10 (Gutsy) == | == Broadcom Wireless in Ubuntu 7.10 (Gutsy) == | ||
| − | |||
The Linux kernel version 2.6.22 included in Ubuntu 7.10 continues to use the bcm43xx driver for Broadcom wireless cards. There have been many improvements in the driver over the last few months resulting in a boost to the default data rate from 11Mbps to 24Mbps. There have also been improvements in range and support has been increased to a greater number of cards. | The Linux kernel version 2.6.22 included in Ubuntu 7.10 continues to use the bcm43xx driver for Broadcom wireless cards. There have been many improvements in the driver over the last few months resulting in a boost to the default data rate from 11Mbps to 24Mbps. There have also been improvements in range and support has been increased to a greater number of cards. | ||
| − | |||
/!\ The firmware code is still not distributed with Ubuntu and must be downloaded and extracted before bcm43xx will work. | /!\ The firmware code is still not distributed with Ubuntu and must be downloaded and extracted before bcm43xx will work. | ||
| − | |||
If you're an Acer laptop user, try the following instructions first. If you install everything correctly and still you're not able to connect to any wifi network, you should try to install acer-acpi package. It often helps and you won't be made to install driver using ndiswrapper. Find out more here: https://launchpad.net/acerlaptop-wifi/ | If you're an Acer laptop user, try the following instructions first. If you install everything correctly and still you're not able to connect to any wifi network, you should try to install acer-acpi package. It often helps and you won't be made to install driver using ndiswrapper. Find out more here: https://launchpad.net/acerlaptop-wifi/ | ||
| − | |||
=== Desktop Installation === | === Desktop Installation === | ||
| − | |||
Ubuntu 7.10 now has bcm43xx firmware installation integrated into the Restricted Driver Manager. This makes the process of obtaining and installing the firmware far easier than in previous releases. | Ubuntu 7.10 now has bcm43xx firmware installation integrated into the Restricted Driver Manager. This makes the process of obtaining and installing the firmware far easier than in previous releases. | ||
| − | |||
==== Internet Enabled Installation ==== | ==== Internet Enabled Installation ==== | ||
| − | |||
This procedure is the simplest, but requires an Internet connection. | This procedure is the simplest, but requires an Internet connection. | ||
| − | + | 1) Open ''System -> Administration -> Restricted Driver Manager'' and you will see that under the '''Firmware''' drop down arrow it says '''Firmware for Broadcom 43xx chipset family''' and under Status it says '''Not in Use'''. | |
| − | 1) Open ''System -> Administration -> Restricted Driver Manager'' and you will see that under the '''Firmware''' drop down arrow it says '''Firmware for Broadcom 43xx chipset family'''. | + | |
| − | + | ||
2) Tick the box under '''Enabled''' to enable the firmware. | 2) Tick the box under '''Enabled''' to enable the firmware. | ||
| − | + | 3) Click '''Enable Firmware''' to continue and the <code><nowiki>bcm43xx-fwcutter</nowiki></code> package will be installed. If you receive a time out error message then you may need to switch to a different repository mirror or try the off-line install further down this page. | |
| − | 3) Click '''Enable Firmware''' to continue | + | |
| − | + | ||
4) Select '''Download from the Internet''' to proceed using the pre-filled URI or select a local file if you prefer. | 4) Select '''Download from the Internet''' to proceed using the pre-filled URI or select a local file if you prefer. | ||
| − | |||
5) Click '''Ok''' to extract the firmware. | 5) Click '''Ok''' to extract the firmware. | ||
| − | + | 6) If the Status has changed to '''In use''', then you are successful. | |
| − | 6) If the | + | |
| − | + | ||
==== Off-line Installation ==== | ==== Off-line Installation ==== | ||
| − | |||
This procedure outlines the process of downloading the neccessary installation files using a separate Internet enabled PC as an intermediary. If you have a working Windows partition, then you can use that to get the file you need and reboot into Ubuntu to finish the installation. | This procedure outlines the process of downloading the neccessary installation files using a separate Internet enabled PC as an intermediary. If you have a working Windows partition, then you can use that to get the file you need and reboot into Ubuntu to finish the installation. | ||
| − | |||
1) Download the [http://packages.ubuntu.com/gutsy/utils/bcm43xx-fwcutter bcm43xx-fwcutter] package from the Universe repository. | 1) Download the [http://packages.ubuntu.com/gutsy/utils/bcm43xx-fwcutter bcm43xx-fwcutter] package from the Universe repository. | ||
| − | + | * Intel compatible - [http://archive.ubuntu.com/ubuntu/pool/universe/b/bcm43xx-fwcutter/bcm43xx-fwcutter_006-3_i386.deb bcm43xx-fwcutter_006-3_i386.deb] | |
| + | * 64 bit - [http://archive.ubuntu.com/ubuntu/pool/universe/b/bcm43xx-fwcutter/bcm43xx-fwcutter_006-3_amd64.deb bcm43xx-fwcutter_006-3_amd64.deb] | ||
| + | * PowerPC - [http://archive.ubuntu.com/ubuntu/pool/universe/b/bcm43xx-fwcutter/bcm43xx-fwcutter_006-3_powerpc.deb bcm43xx-fwcutter_006-3_powerpc.deb] | ||
2) Download the firmware from [http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o] or see Firmware Sources below. | 2) Download the firmware from [http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o] or see Firmware Sources below. | ||
| − | |||
3) Transfer these files on to the Ubuntu machine. | 3) Transfer these files on to the Ubuntu machine. | ||
| − | + | 4) Double-click the bcm43xx-fwcutter-*.deb package to install with the package installer. You may receive a warning that there is the same version available from the channel, but as it's not currently accessible you will have to proceed with this file. | |
| − | 4) Double-click the bcm43xx-fwcutter-*.deb package to install with | + | 5) During installation it will ask you if you would like it to fetch and extract the firmware. This step will fail without an Internet connection so just click '''Forward''' and then close the the package installer. |
| − | + | 6) Open ''System -> Administration -> Restricted Driver Manager'' and you will see that under the '''Firmware''' drop down arrow it says '''Firmware for Broadcom 43xx chipset family''' and under Status it says '''Not in Use'''. | |
| − | 5) Open ''System -> Administration -> Restricted Driver Manager'' and you will see that under the '''Firmware''' drop down arrow it says '''Firmware for Broadcom 43xx chipset family'''. | + | |
| − | + | ||
6) Tick the box under '''Enabled''' to enable the firmware. | 6) Tick the box under '''Enabled''' to enable the firmware. | ||
| − | |||
7) Click '''Enable Firmware''' to continue. | 7) Click '''Enable Firmware''' to continue. | ||
| − | + | 8) Select '''Use a local file''' and browse to the wl_apsta-3.130.20.0.o firmware file and click '''Open'''. | |
| − | 8) Select '''local file''' and browse to the wl_apsta-3.130.20.0.o firmware file. | + | |
| − | + | ||
9) Click '''Ok''' to extract the firmware. | 9) Click '''Ok''' to extract the firmware. | ||
| − | |||
10) If the status has changed to '''In use''', then you are successful. | 10) If the status has changed to '''In use''', then you are successful. | ||
| − | |||
=== Firmware Sources === | === Firmware Sources === | ||
| − | |||
If you are unable to download the firmware directly then there are few alternative methods of obtaining the firmware. This usually involves finding a Windows driver file. | If you are unable to download the firmware directly then there are few alternative methods of obtaining the firmware. This usually involves finding a Windows driver file. | ||
| − | |||
* [http://linuxwireless.org/en/users/Drivers/b43 linuxwireless.org] provides a link to the most reliable firmware source as it is the one recommended by the bcm43xx developers. This means that it has had the most testing time and is actively maintained. | * [http://linuxwireless.org/en/users/Drivers/b43 linuxwireless.org] provides a link to the most reliable firmware source as it is the one recommended by the bcm43xx developers. This means that it has had the most testing time and is actively maintained. | ||
* The .sys file from a Windows Driver CD that came with the card or on the pre-installed Windows partition. This driver firmware will likely already be at least a few months old and might not work with the firmware extraction tool. | * The .sys file from a Windows Driver CD that came with the card or on the pre-installed Windows partition. This driver firmware will likely already be at least a few months old and might not work with the firmware extraction tool. | ||
* The card manufacturer's website may provide a driver file to download. Once again, this might not work with the firmware extraction tool. | * The card manufacturer's website may provide a driver file to download. Once again, this might not work with the firmware extraction tool. | ||
* A list of driver files supported by the extraction tool can be found in the /use/share/doc/bcm43xx-fwcutter/README.gz/README file or online at http://svn.berlios.de/svnroot/repos/bcm43xx/tags/fwcutter/006/README | * A list of driver files supported by the extraction tool can be found in the /use/share/doc/bcm43xx-fwcutter/README.gz/README file or online at http://svn.berlios.de/svnroot/repos/bcm43xx/tags/fwcutter/006/README | ||
| − | |||
/!\ Only v3 firmware can be used in Ubuntu 7.10. | /!\ Only v3 firmware can be used in Ubuntu 7.10. | ||
| − | |||
=== Server Install === | === Server Install === | ||
| − | |||
If you are installing a Broadcom wireless card on a server without a desktop environment then the Restricted Drivers Manager will not be available to you. In this case you will have to download and install the firmware extractor and driver using the CLI. | If you are installing a Broadcom wireless card on a server without a desktop environment then the Restricted Drivers Manager will not be available to you. In this case you will have to download and install the firmware extractor and driver using the CLI. | ||
| − | |||
1) Enable the Universe repository and refresh the dependencies. | 1) Enable the Universe repository and refresh the dependencies. | ||
| − | |||
2) Download the <code><nowiki>bcm43xx-fwcutter</nowiki></code> utility. | 2) Download the <code><nowiki>bcm43xx-fwcutter</nowiki></code> utility. | ||
<pre><nowiki> | <pre><nowiki> | ||
| 第83行： | 第51行： | ||
---- | ---- | ||
or | or | ||
| − | |||
3) Download the firmware. | 3) Download the firmware. | ||
<pre><nowiki> | <pre><nowiki> | ||
| 第92行： | 第59行： | ||
sudo bcm43xx-fwcutter -w /lib/firmware/ /tmp/wl_apsta-3.130.20.0.o | sudo bcm43xx-fwcutter -w /lib/firmware/ /tmp/wl_apsta-3.130.20.0.o | ||
</nowiki></pre> | </nowiki></pre> | ||
| − | |||
=== Troubleshooting === | === Troubleshooting === | ||
| − | |||
By default the wireless interfaces will be managed by [[UbuntuHelp:WifiDocs/NetworkManager |Network Manager]]. You may want to disable it for a short while during troubleshooting. | By default the wireless interfaces will be managed by [[UbuntuHelp:WifiDocs/NetworkManager |Network Manager]]. You may want to disable it for a short while during troubleshooting. | ||
| − | |||
Reload the driver module using the following commands: | Reload the driver module using the following commands: | ||
<pre><nowiki> | <pre><nowiki> | ||
| 第103行： | 第67行： | ||
</nowiki></pre> | </nowiki></pre> | ||
Then use <code><nowiki>dmesg</nowiki></code> to check if the driver loaded cleanly. | Then use <code><nowiki>dmesg</nowiki></code> to check if the driver loaded cleanly. | ||
| − | |||
Find the name of the interface using this command. It should be of the form '''ethX''' | Find the name of the interface using this command. It should be of the form '''ethX''' | ||
<pre><nowiki> | <pre><nowiki> | ||
iwconfig | iwconfig | ||
</nowiki></pre> | </nowiki></pre> | ||
| − | |||
Scan for networks to check if your card is working. | Scan for networks to check if your card is working. | ||
<pre><nowiki> | <pre><nowiki> | ||
sudo iwlist ethX scan | sudo iwlist ethX scan | ||
</nowiki></pre> | </nowiki></pre> | ||
| − | |||
Note: For some reason I could not scan for networks, the result of iwlist would be "no networks found", but when I entered the access point information manually it worked fine. | Note: For some reason I could not scan for networks, the result of iwlist would be "no networks found", but when I entered the access point information manually it worked fine. | ||
| − | |||
==== Connecting to your network ==== | ==== Connecting to your network ==== | ||
| − | |||
[[UbuntuHelp:WifiDocs/NetworkManager |Network Manager]] is in control of all interfaces by default in Ubuntu 7.10 and it is available via the nm-applet in the on the upper right side of your screen, next to sound applet, etc... | [[UbuntuHelp:WifiDocs/NetworkManager |Network Manager]] is in control of all interfaces by default in Ubuntu 7.10 and it is available via the nm-applet in the on the upper right side of your screen, next to sound applet, etc... | ||
You can manage your connections directly by left clicking (to choose a network) or right (to see info, enable or disable networking) on it. | You can manage your connections directly by left clicking (to choose a network) or right (to see info, enable or disable networking) on it. | ||
| − | |||
If it doesn't work, you can use the following : | If it doesn't work, you can use the following : | ||
| − | |||
Go to System -> Administration -> Network (if using gnome). click on your wireless card, click Properties, untick "enable roaming" and enter your wireless network details. | Go to System -> Administration -> Network (if using gnome). click on your wireless card, click Properties, untick "enable roaming" and enter your wireless network details. | ||
| − | |||
Everything should now work. It should also work every time you turn on your computer without further configuration. | Everything should now work. It should also work every time you turn on your computer without further configuration. | ||
| − | |||
/!\ Remember that you can use network-admin or network-manager, but not both! You have to set your card to roaming mode in network-admin to use network-manager, if you have already configured it in network-admin. | /!\ Remember that you can use network-admin or network-manager, but not both! You have to set your card to roaming mode in network-admin to use network-manager, if you have already configured it in network-admin. | ||
| − | |||
==== Manual Configuration of WPA ==== | ==== Manual Configuration of WPA ==== | ||
| − | |||
The bcm43xx driver has full support of the Linux Wireless Extensions and therefore should use wpa_supplicant via the wext driver interface. All known cards are capable of using WPA-PSK and WPA-Enterprise. See the [[UbuntuHelp:WifiDocs/WPAHowTo |WPA]] pages for more information about configuring Wi-fi Protected Access manually. | The bcm43xx driver has full support of the Linux Wireless Extensions and therefore should use wpa_supplicant via the wext driver interface. All known cards are capable of using WPA-PSK and WPA-Enterprise. See the [[UbuntuHelp:WifiDocs/WPAHowTo |WPA]] pages for more information about configuring Wi-fi Protected Access manually. | ||
| − | |||
=== Further Notes === | === Further Notes === | ||
| − | |||
* You may also use [[UbuntuHelp:WifiDocs/Driver/Ndiswrapper |ndiswrapper]] to get your wifi card working. This was the only way of getting support for these devices before Linux kernel 2.6.17-rc2. This will not work on PowerPC. | * You may also use [[UbuntuHelp:WifiDocs/Driver/Ndiswrapper |ndiswrapper]] to get your wifi card working. This was the only way of getting support for these devices before Linux kernel 2.6.17-rc2. This will not work on PowerPC. | ||
* The bcm43xx driver is now considered to be deprecated and it is very likely that this will be the last release of Ubuntu to use it. The new [http://linuxwireless.org/en/users/Drivers/b43 b43] and b43legacy drivers are scheduled to enter the main kernel in 2.6.24 and will replace bcm43xx entirely. | * The bcm43xx driver is now considered to be deprecated and it is very likely that this will be the last release of Ubuntu to use it. The new [http://linuxwireless.org/en/users/Drivers/b43 b43] and b43legacy drivers are scheduled to enter the main kernel in 2.6.24 and will replace bcm43xx entirely. | ||
* Forum Support for this Wiki - nickm wrote a howto [http://ubuntuforums.org/showthread.php?t=185174 on this forum] for bcm43xx. If you have questions or need additional help please post there. | * Forum Support for this Wiki - nickm wrote a howto [http://ubuntuforums.org/showthread.php?t=185174 on this forum] for bcm43xx. If you have questions or need additional help please post there. | ||
| − | |||
(Note: Here's a [http://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Feisty_No-Fluff no-fluff howTo] for using a bcm43xx--a bcm4311, to be specific--in Feisty. Also includes WPA configuration.) | (Note: Here's a [http://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Feisty_No-Fluff no-fluff howTo] for using a bcm43xx--a bcm4311, to be specific--in Feisty. Also includes WPA configuration.) | ||
| − | |||
=== Resources === | === Resources === | ||
* The Ubuntu 7.04 wiki entry: [[UbuntuHelp:WifiDocs/Driver/bcm43xx/Feisty]] | * The Ubuntu 7.04 wiki entry: [[UbuntuHelp:WifiDocs/Driver/bcm43xx/Feisty]] | ||
2007年11月30日 (五) 22:22的版本
 |
点击翻译: |
English |
请不要直接编辑翻译本页，本页将定期与来源同步。 |
目录
Broadcom Wireless in Ubuntu 7.10 (Gutsy)
The Linux kernel version 2.6.22 included in Ubuntu 7.10 continues to use the bcm43xx driver for Broadcom wireless cards. There have been many improvements in the driver over the last few months resulting in a boost to the default data rate from 11Mbps to 24Mbps. There have also been improvements in range and support has been increased to a greater number of cards. /!\ The firmware code is still not distributed with Ubuntu and must be downloaded and extracted before bcm43xx will work. If you're an Acer laptop user, try the following instructions first. If you install everything correctly and still you're not able to connect to any wifi network, you should try to install acer-acpi package. It often helps and you won't be made to install driver using ndiswrapper. Find out more here: https://launchpad.net/acerlaptop-wifi/
Desktop Installation
Ubuntu 7.10 now has bcm43xx firmware installation integrated into the Restricted Driver Manager. This makes the process of obtaining and installing the firmware far easier than in previous releases.
Internet Enabled Installation
This procedure is the simplest, but requires an Internet connection.
1) Open System -> Administration -> Restricted Driver Manager and you will see that under the Firmware drop down arrow it says Firmware for Broadcom 43xx chipset family and under Status it says Not in Use.
2) Tick the box under Enabled to enable the firmware.
3) Click Enable Firmware to continue and the bcm43xx-fwcutter package will be installed. If you receive a time out error message then you may need to switch to a different repository mirror or try the off-line install further down this page.
4) Select Download from the Internet to proceed using the pre-filled URI or select a local file if you prefer.
5) Click Ok to extract the firmware.
6) If the Status has changed to In use, then you are successful.
Off-line Installation
This procedure outlines the process of downloading the neccessary installation files using a separate Internet enabled PC as an intermediary. If you have a working Windows partition, then you can use that to get the file you need and reboot into Ubuntu to finish the installation. 1) Download the bcm43xx-fwcutter package from the Universe repository.
- Intel compatible - bcm43xx-fwcutter_006-3_i386.deb
- 64 bit - bcm43xx-fwcutter_006-3_amd64.deb
- PowerPC - bcm43xx-fwcutter_006-3_powerpc.deb
2) Download the firmware from [1] or see Firmware Sources below. 3) Transfer these files on to the Ubuntu machine. 4) Double-click the bcm43xx-fwcutter-*.deb package to install with the package installer. You may receive a warning that there is the same version available from the channel, but as it's not currently accessible you will have to proceed with this file. 5) During installation it will ask you if you would like it to fetch and extract the firmware. This step will fail without an Internet connection so just click Forward and then close the the package installer. 6) Open System -> Administration -> Restricted Driver Manager and you will see that under the Firmware drop down arrow it says Firmware for Broadcom 43xx chipset family and under Status it says Not in Use. 6) Tick the box under Enabled to enable the firmware. 7) Click Enable Firmware to continue. 8) Select Use a local file and browse to the wl_apsta-3.130.20.0.o firmware file and click Open. 9) Click Ok to extract the firmware. 10) If the status has changed to In use, then you are successful.
Firmware Sources
If you are unable to download the firmware directly then there are few alternative methods of obtaining the firmware. This usually involves finding a Windows driver file.
- linuxwireless.org provides a link to the most reliable firmware source as it is the one recommended by the bcm43xx developers. This means that it has had the most testing time and is actively maintained.
- The .sys file from a Windows Driver CD that came with the card or on the pre-installed Windows partition. This driver firmware will likely already be at least a few months old and might not work with the firmware extraction tool.
- The card manufacturer's website may provide a driver file to download. Once again, this might not work with the firmware extraction tool.
- A list of driver files supported by the extraction tool can be found in the /use/share/doc/bcm43xx-fwcutter/README.gz/README file or online at http://svn.berlios.de/svnroot/repos/bcm43xx/tags/fwcutter/006/README
/!\ Only v3 firmware can be used in Ubuntu 7.10.
Server Install
If you are installing a Broadcom wireless card on a server without a desktop environment then the Restricted Drivers Manager will not be available to you. In this case you will have to download and install the firmware extractor and driver using the CLI.
1) Enable the Universe repository and refresh the dependencies.
2) Download the bcm43xx-fwcutter utility.
sudo aptitude install bcm43xx-fwcutter
3) Download and extract the firmware using a script.
sudo /usr/share/bcm43xx-fwcutter/install_bcm43xx_firmware.sh
or 3) Download the firmware.
wget http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o /tmp/wl_apsta-3.130.20.0.o
4) Extract the firmware to a kernel independant location.
sudo bcm43xx-fwcutter -w /lib/firmware/ /tmp/wl_apsta-3.130.20.0.o
Troubleshooting
By default the wireless interfaces will be managed by Network Manager. You may want to disable it for a short while during troubleshooting. Reload the driver module using the following commands:
sudo modprobe -r bcm43xx sudo modprobe bcm43xx
Then use dmesg to check if the driver loaded cleanly.
Find the name of the interface using this command. It should be of the form ethX
iwconfig
Scan for networks to check if your card is working.
sudo iwlist ethX scan
Note: For some reason I could not scan for networks, the result of iwlist would be "no networks found", but when I entered the access point information manually it worked fine.
Connecting to your network
Network Manager is in control of all interfaces by default in Ubuntu 7.10 and it is available via the nm-applet in the on the upper right side of your screen, next to sound applet, etc... You can manage your connections directly by left clicking (to choose a network) or right (to see info, enable or disable networking) on it. If it doesn't work, you can use the following : Go to System -> Administration -> Network (if using gnome). click on your wireless card, click Properties, untick "enable roaming" and enter your wireless network details. Everything should now work. It should also work every time you turn on your computer without further configuration. /!\ Remember that you can use network-admin or network-manager, but not both! You have to set your card to roaming mode in network-admin to use network-manager, if you have already configured it in network-admin.
Manual Configuration of WPA
The bcm43xx driver has full support of the Linux Wireless Extensions and therefore should use wpa_supplicant via the wext driver interface. All known cards are capable of using WPA-PSK and WPA-Enterprise. See the WPA pages for more information about configuring Wi-fi Protected Access manually.
Further Notes
- You may also use ndiswrapper to get your wifi card working. This was the only way of getting support for these devices before Linux kernel 2.6.17-rc2. This will not work on PowerPC.
- The bcm43xx driver is now considered to be deprecated and it is very likely that this will be the last release of Ubuntu to use it. The new b43 and b43legacy drivers are scheduled to enter the main kernel in 2.6.24 and will replace bcm43xx entirely.
- Forum Support for this Wiki - nickm wrote a howto on this forum for bcm43xx. If you have questions or need additional help please post there.
(Note: Here's a no-fluff howTo for using a bcm43xx--a bcm4311, to be specific--in Feisty. Also includes WPA configuration.)
Resources
- The Ubuntu 7.04 wiki entry: UbuntuHelp:WifiDocs/Driver/bcm43xx/Feisty
- The Ubuntu 6.10 wiki entry: UbuntuHelp:WifiDocs/Driver/bcm43xx/Edgy
- Linux Wireless Website [2]
- Ndiswrapper UbuntuHelp:WifiDocs/Driver/Ndiswrapper
