个人工具

“UbuntuHelp:BinaryDriverHowto/KeyspanDriver”的版本间的差异

来自Ubuntu中文

跳转至： 导航, 搜索
小
小
第2行： 第2行：
 
{{Languages|UbuntuHelp:BinaryDriverHowto/KeyspanDriver}}
 
{{Languages|UbuntuHelp:BinaryDriverHowto/KeyspanDriver}}
 
=== How to install the non-free firmware for Keyspan USB <-> serial converters ===
 
=== How to install the non-free firmware for Keyspan USB <-> serial converters ===
−
KeyspanDriverHowto:: This Howto documents how to get a Keyspan USB-to-serial converter working with Ubuntu.  Most of these devices require firmware to be downloaded to the device each time you connect it to your USB bus.  The problem is that this firmware is distributed with a license too restrictive to allow Ubuntu to redistribute it.
+
==== Ubuntu 7.10 ====
−
==== Use a kernel.org kernel ====
+
To install the firmware in Ubuntu 7.10 you need to first download the [http://www.imperialviolet.org/binary/keyspan.ko keyspan module]. Next you need to copy the keyspan module to
−
Compile your own kernel from kernel.org source.  See the KernelCompileHowto for more information on how to do this.
+
'''/lib/modules/2.6.22-16-generic/kernel/drivers/usb/serial'''
−
==== Patch the ubuntu kernel ====
+
<pre><nowiki>
−
This is a bit sneakier.  For now, I will say that you need to download the kernel.org kernel, and copy keyspan* from drivers/usb/serial to drivers/usb/serial in the unpacked ubuntu kernel tree.  Also, copy the relevant bits from Kconfig in the upstream drivers/usb/serial directory into Kconfig in the same directory under the Unbutu source tree.
+
sudo cp /lib/modules/2.6.22-16-generic/kernel/drivers/usb/serial
−
Then compile it, using the KernelCompileHowto as a guide.
+
</nowiki></pre>
−
This is a very rushed stab at an explanation, mainly so I can get the page out there, and tidy it up later.  Sorry for the mess. :(
+
then
 +
<pre><nowiki>
 +
sudo depmod -a && modprobe keyspan
 +
</nowiki></pre>
 +
==== Ubuntu 8.04 and newer ====
 +
The module is included in the kernel so the keyspan USB to Serial Adapter should work right out of the box.
 
----
 
----
 
[[UbuntuHelp:/PageDiscussion|Discuss this page.]]
 
[[UbuntuHelp:/PageDiscussion|Discuss this page.]]
−
Categories: [[category:CategoryDocumentation]] [[category:CategoryCleanup]]
 
  
 
[[category:UbuntuHelp]]
 
[[category:UbuntuHelp]]

2009年5月12日 (二) 16:00的版本

Geographylogo.png 文章出处: 

https://help.ubuntu.com/community/BinaryDriverHowto/KeyspanDriver

Geographylogo.png 点击翻译: 

English

请不要直接编辑翻译本页，本页将定期与来源同步。

How to install the non-free firmware for Keyspan USB <-> serial converters

Ubuntu 7.10

To install the firmware in Ubuntu 7.10 you need to first download the keyspan module. Next you need to copy the keyspan module to /lib/modules/2.6.22-16-generic/kernel/drivers/usb/serial 

sudo cp /lib/modules/2.6.22-16-generic/kernel/drivers/usb/serial

then 

sudo depmod -a && modprobe keyspan

Ubuntu 8.04 and newer

The module is included in the kernel so the keyspan USB to Serial Adapter should work right out of the box.

Discuss this page.

取自“https://wiki.ubuntu.org.cn/index.php?title=UbuntuHelp:BinaryDriverHowto/KeyspanDriver&oldid=114695”