特殊:Badtitle/NS100:WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick

来自Ubuntu中文
Wikibot留言 | 贡献2007年11月30日 (五) 22:20的版本 (新页面: {{From|https://help.ubuntu.com/community/WifiDocs/Device/Topcom_Skyracer_USB_4001g_%28WLAN-USB-Stick%29}} {{Languages|UbuntuHelp:WifiDocs/Device/Topcom_Skyracer_USB_4001g_%28WLAN-USB-Stic...)
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳到导航跳到搜索
可打印版本不再受到支持且可能有渲染错误。请更新您的浏览器书签并改用浏览器默认打印功能。

{{#ifexist: :WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick/zh | | {{#ifexist: WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick/zh | | {{#ifeq: {{#titleparts:WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick|1|-1|}} | zh | | }}

Topcom Skyracer USB 4001g (WLAN-USB-Stick)

  • USB: USB 2.0
  • Encryption types: 128bit WEP;64bit WEP;WPA-PSK
  • WLAN: IEEE 802.11b;IEEE 802.11g
  • Max. bandwidth: 54Mbps

Installation

  1. Check if zd1201 module is already loaded by typing the following command in a terminal:
sudo lsmod | grep zd1201

Output should be something like:

zd1201                 22660  0
usbcore               130692  4 zd1201,ehci_hcd,uhci_hcd

If the output is empty you have to load the module by the following: type uname -r, the output shows your kernel version. Now you have to edit (sudo gedit <filename> or some editor of your choice as root) the following three files:

/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.alias
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.dep
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.usbmap

Replace VERSION_OUTPUT_OF_COMMAND_ABOVE with the output of the uname -r command. In your editor add

zd1201

at the bottom of the file, if the phrase isn't in there yet.

  1. Now download the 1201 Firmware from Sourceforge.net, unpack (tar -xzvf) zd1201-<version>-fw.tar.gz to /tmp and change working directory via cd /tmp/zd1201-<version>-fw.
  2. Last but not least you have to copy the firmware files to /lib/firmware by
sudo cp -p -f zd1201*.fw /lib/firmware

Now plugin your WLAn adapter. iwconfig should list the adapter in it's output.