UbuntuHelp:MythTV DVB-S
来自Ubuntu中文
点击翻译: |
English |
MythTV DVB-S HowTo
<<Include(MythTV/Header)>> Getting DVB-S working with Ubuntu (Mythbuntu) 9.04. Tested with the following card:
- Hauppauge Nova-S Plus
mythtv-setup
At the end of the MythBuntu installation process mythtv-setup is starting: Add DVB-S card, as card type choose: DVB DTV TV-Card (v3.x). As Frontend ID there should be some autodetected text, for Hauppauge Nova-S Plus it is: Conexant CX24123/CX24109 Subtype: DVB-S . For video source you can use Transmitted guide only (EIT) . Input connections: Dvb , Video source: EIT , Scan for channels -> did not work for me, you can try it with this frequency for Astra 19.2E: 12551000, symbolrate: 22000000 and polarity: Vertical for the full scan. (or Hotbird: 12539000, 27500000, horizontal) .
scan for channels in console
If the scan in mythtv-setup don't works, do it by hand: Go to a console, e.g. by typing Strg-Alt-F1 (Ctrl-ALt-F1), log in and type:
sudo /etc/init.d/mythtv-backend stop cd scan /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf
(not dvbscan anymore) If you have more than one adapter and your Nova-S is for example adapter1, type
scan -a 1 /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf
If you want another satellite then Astra, just ls in this directory and choose the one that fits for you. You should see a lot of channels running through you screen. The channels.conf should be in your home-directory after scanning. To start it all again type
/etc/init.d/mythtv-backend start mythfrontend
Now you can import your new channels.conf in mythtv-setup instead of scanning for channels there.