“UbuntuHelp:Forum/software/TentecRx320”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第6行: | 第6行: | ||
<pre><nowiki> | <pre><nowiki> | ||
sudo dpkg -i rx320-0.6.2-1_i386.deb | sudo dpkg -i rx320-0.6.2-1_i386.deb | ||
− | </nowiki></pre> | + | </nowiki></pre> |
3. Run the control software. | 3. Run the control software. | ||
<pre><nowiki> | <pre><nowiki> | ||
− | rx320 | + | rx320 |
− | </nowiki></pre> | + | </nowiki></pre> |
4. Right click on a blank space of the controller's window and choose "Configure" and put in the /dev entry for the serial port that the radio is connected to. Mine, for example, is /dev/ttyS0. | 4. Right click on a blank space of the controller's window and choose "Configure" and put in the /dev entry for the serial port that the radio is connected to. Mine, for example, is /dev/ttyS0. | ||
---- | ---- |
2007年12月6日 (四) 10:32的版本
点击翻译: |
English |
The Ten Tec RX320D software-defined shortwave receiver can be controlled graphically on Ubuntu. This has been tested with Ubuntu 6.06.
- You'll need to download one package since Xclass can be found in the Universe Repository. On the other had you need to go to here to download the rx320 .deb file.
2. Now you need to install Xclass and rx320. Remember that xclass can be found in the Universe Repository and to install rx320 you need to put this in the terminal.
sudo dpkg -i rx320-0.6.2-1_i386.deb
3. Run the control software.
rx320
4. Right click on a blank space of the controller's window and choose "Configure" and put in the /dev entry for the serial port that the radio is connected to. Mine, for example, is /dev/ttyS0.