“UbuntuHelp:WifiDocs/Driver/acx100”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第1行: | 第1行: | ||
{{From|https://help.ubuntu.com/community/WifiDocs/Driver/acx100}} | {{From|https://help.ubuntu.com/community/WifiDocs/Driver/acx100}} | ||
{{Languages|UbuntuHelp:WifiDocs/Driver/acx100}} | {{Languages|UbuntuHelp:WifiDocs/Driver/acx100}} | ||
+ | All of the following knowledge is deprecated as of Ubuntu 9.10 when they switched from linux-restricted-modules to the [[UbuntuHelp:DKMS|DKMS]] system. Good luck. | ||
+ | ---- | ||
=== Ubuntu 6.06 (Dapper) === | === Ubuntu 6.06 (Dapper) === | ||
Unfortunately, Dapper currently has broken support for ACX100-based WiFi cards, such as the D-Link DWL-650+ (note that D-Link makes many cards with almost identical model numbers, which can differ significantly). | Unfortunately, Dapper currently has broken support for ACX100-based WiFi cards, such as the D-Link DWL-650+ (note that D-Link makes many cards with almost identical model numbers, which can differ significantly). |
2010年5月20日 (四) 00:55的最新版本
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
All of the following knowledge is deprecated as of Ubuntu 9.10 when they switched from linux-restricted-modules to the DKMS system. Good luck.
Ubuntu 6.06 (Dapper)
Unfortunately, Dapper currently has broken support for ACX100-based WiFi cards, such as the D-Link DWL-650+ (note that D-Link makes many cards with almost identical model numbers, which can differ significantly). I was able to fix this by following these steps:
- Download and unpack the ACX driver source to a directory of your choice. Download the latest tarball from http://acx100.erley.org/
- Install the necessary build tools:
sudo apt-get install build-essential linux-headers-`uname -r`
- Change to the directory in which you unpacked the source, then make and install the driver:
make -C /lib/modules/`uname -r`/build M=`pwd` sudo make -C /lib/modules/`uname -r`/build M=`pwd` modules_install
- Copy (or symlink, if you wish) the firmware from the -23 kernel's directory to the -25 kernel's directory (I'm not sure why the -25 kernel doesn't seem to have the acx firmware, but this was the final step to make it work for me):
sudo cp -ar /lib/firmware/2.6.15-23-386/acx /lib/firmware/2.6.15-25-386
- Remove the PC Card, then unload the driver:
sudo modprobe -r acx
- Insert the PC Card, then check dmesg for success:
sudo dmesg | grep acx
Hopefully you will see notes about the radio type and uploaded firmware. - Now you should be able to use the (K)Ubuntu WiFi tools to connect to wireless networks.
These may not be the most efficient instructions, but they worked for me.
More information
See also WifiDocs/Driver/acx111