特殊:Badtitle/NS100:WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick:修订间差异

来自Ubuntu中文
跳到导航跳到搜索
Wikibot留言 | 贡献
无编辑摘要
Wikibot留言 | 贡献
无编辑摘要
 
第7行: 第7行:
* Max. bandwidth: 54Mbps
* Max. bandwidth: 54Mbps
=== Installation ===
=== Installation ===
<ol><li>Check if zd1201 module is already loaded by typing the following command in a terminal:<pre><nowiki>sudo lsmod | grep zd1201
<ol><li>Check if zd1201 module is already loaded by typing the following command in a terminal:<pre><nowiki>
</nowiki></pre>Output should be something like:<pre><nowiki>zd1201                22660  0
sudo lsmod | grep zd1201
usbcore              130692  4 zd1201,ehci_hcd,uhci_hcd</nowiki></pre>If the output is empty you have to load the module by the following: type <code><nowiki>uname -r</nowiki></code>, the output shows your kernel version. Now you have to edit (<code><nowiki>sudo gedit <filename></nowiki></code> or some editor of your choice as root) the following three files:<pre><nowiki>/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.alias
</nowiki></pre>Output should be something like:<pre><nowiki>
zd1201                22660  0
usbcore              130692  4 zd1201,ehci_hcd,uhci_hcd</nowiki></pre>If the output is empty you have to load the module by the following: type <code><nowiki>uname -r</nowiki></code>, the output shows your kernel version. Now you have to edit (<code><nowiki>sudo gedit <filename></nowiki></code> or some editor of your choice as root) the following three files:<pre><nowiki>
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.alias
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.dep
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.dep
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.usbmap</nowiki></pre>Replace ''VERSION_OUTPUT_OF_COMMAND_ABOVE'' with the output of the <code><nowiki>uname -r</nowiki></code> command. In your editor add<pre><nowiki>
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.usbmap</nowiki></pre>Replace ''VERSION_OUTPUT_OF_COMMAND_ABOVE'' with the output of the <code><nowiki>uname -r</nowiki></code> command. In your editor add<pre><nowiki>
第15行: 第18行:
</nowiki></pre>at the bottom of the file, if the phrase isn't in there yet.
</nowiki></pre>at the bottom of the file, if the phrase isn't in there yet.
</li><li>Now download the 1201 Firmware from [http://prdownloads.sourceforge.net/linux-lc100020/ Sourceforge.net], unpack (<code><nowiki>tar -xzvf</nowiki></code>) zd1201-<version>-fw.tar.gz to <code><nowiki>/tmp</nowiki></code> and change working directory via <code><nowiki>cd /tmp/zd1201-<version>-fw</nowiki></code>.
</li><li>Now download the 1201 Firmware from [http://prdownloads.sourceforge.net/linux-lc100020/ Sourceforge.net], unpack (<code><nowiki>tar -xzvf</nowiki></code>) zd1201-<version>-fw.tar.gz to <code><nowiki>/tmp</nowiki></code> and change working directory via <code><nowiki>cd /tmp/zd1201-<version>-fw</nowiki></code>.
</li><li>Last but not least you have to copy the firmware files to <code><nowiki>/lib/firmware</nowiki></code> by<pre><nowiki>sudo cp -p -f zd1201*.fw /lib/firmware
</li><li>Last but not least you have to copy the firmware files to <code><nowiki>/lib/firmware</nowiki></code> by<pre><nowiki>
sudo cp -p -f zd1201*.fw /lib/firmware
</nowiki></pre>Now plugin your WLAn adapter. <code><nowiki>iwconfig</nowiki></code> should list the adapter in it's output.</li></ol>
</nowiki></pre>Now plugin your WLAn adapter. <code><nowiki>iwconfig</nowiki></code> should list the adapter in it's output.</li></ol>




[[category:UbuntuHelp]]
[[category:UbuntuHelp]]

2010年5月20日 (四) 00:54的最新版本

{{#ifexist: :WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick/zh | | {{#ifexist: WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick/zh | | {{#ifeq: {{#titleparts:WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick|1|-1|}} | zh | | }}

Topcom Skyracer USB 4001g (WLAN-USB-Stick)

  • USB: USB 2.0
  • Encryption types: 128bit WEP;64bit WEP;WPA-PSK
  • WLAN: IEEE 802.11b;IEEE 802.11g
  • Max. bandwidth: 54Mbps

Installation

  1. Check if zd1201 module is already loaded by typing the following command in a terminal:
    sudo lsmod | grep zd1201
    
    Output should be something like:

    zd1201 22660 0

    usbcore 130692 4 zd1201,ehci_hcd,uhci_hcd
    If the output is empty you have to load the module by the following: type uname -r, the output shows your kernel version. Now you have to edit (sudo gedit <filename> or some editor of your choice as root) the following three files:

    /lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.alias /lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.dep

    /lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.usbmap
    Replace VERSION_OUTPUT_OF_COMMAND_ABOVE with the output of the uname -r command. In your editor add

    zd1201

    at the bottom of the file, if the phrase isn't in there yet.
  2. Now download the 1201 Firmware from Sourceforge.net, unpack (tar -xzvf) zd1201-<version>-fw.tar.gz to /tmp and change working directory via cd /tmp/zd1201-<version>-fw.
  3. Last but not least you have to copy the firmware files to /lib/firmware by
    sudo cp -p -f zd1201*.fw /lib/firmware
    
    Now plugin your WLAn adapter. iwconfig should list the adapter in it's output.