“UbuntuHelp:WifiDocs/Device/Topcom Skyracer USB 4001g WLAN-USB-Stick”的版本间的差异
来自Ubuntu中文
小 (新页面: {{From|https://help.ubuntu.com/community/WifiDocs/Device/Topcom_Skyracer_USB_4001g_%28WLAN-USB-Stick%29}} {{Languages|UbuntuHelp:WifiDocs/Device/Topcom_Skyracer_USB_4001g_%28WLAN-USB-Stic...) |
小 |
||
第7行: | 第7行: | ||
* Max. bandwidth: 54Mbps | * Max. bandwidth: 54Mbps | ||
=== Installation === | === Installation === | ||
− | # Check if zd1201 module is already loaded by typing the following command in a terminal: | + | # Check if zd1201 module is already loaded by typing the following command in a terminal:<pre><nowiki>sudo lsmod | grep zd1201 |
− | <pre><nowiki>sudo lsmod | grep zd1201 | + | </nowiki></pre>Output should be something like:<pre><nowiki>zd1201 22660 0 |
− | </nowiki></pre>Output should be something like: | + | usbcore 130692 4 zd1201,ehci_hcd,uhci_hcd</nowiki></pre>If the output is empty you have to load the module by the following: type <code><nowiki>uname -r</nowiki></code>, the output shows your kernel version. Now you have to edit (<code><nowiki>sudo gedit <filename></nowiki></code> or some editor of your choice as root) the following three files:<pre><nowiki>/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.alias |
− | <pre><nowiki>zd1201 22660 0 | + | |
− | usbcore 130692 4 zd1201,ehci_hcd,uhci_hcd</nowiki></pre>If the output is empty you have to load the module by the following: type <code><nowiki>uname -r</nowiki></code>, the output shows your kernel version. Now you have to edit (<code><nowiki>sudo gedit <filename></nowiki></code> or some editor of your choice as root) the following three files: | + | |
− | <pre><nowiki>/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.alias | + | |
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.dep | /lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.dep | ||
− | /lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.usbmap</nowiki></pre>Replace ''VERSION_OUTPUT_OF_COMMAND_ABOVE'' with the output of the <code><nowiki>uname -r</nowiki></code> command. In your editor add | + | /lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.usbmap</nowiki></pre>Replace ''VERSION_OUTPUT_OF_COMMAND_ABOVE'' with the output of the <code><nowiki>uname -r</nowiki></code> command. In your editor add<pre><nowiki> |
− | <pre><nowiki> | + | |
zd1201 | zd1201 | ||
</nowiki></pre>at the bottom of the file, if the phrase isn't in there yet. | </nowiki></pre>at the bottom of the file, if the phrase isn't in there yet. | ||
# Now download the 1201 Firmware from [http://prdownloads.sourceforge.net/linux-lc100020/ Sourceforge.net], unpack (<code><nowiki>tar -xzvf</nowiki></code>) zd1201-<version>-fw.tar.gz to <code><nowiki>/tmp</nowiki></code> and change working directory via <code><nowiki>cd /tmp/zd1201-<version>-fw</nowiki></code>. | # Now download the 1201 Firmware from [http://prdownloads.sourceforge.net/linux-lc100020/ Sourceforge.net], unpack (<code><nowiki>tar -xzvf</nowiki></code>) zd1201-<version>-fw.tar.gz to <code><nowiki>/tmp</nowiki></code> and change working directory via <code><nowiki>cd /tmp/zd1201-<version>-fw</nowiki></code>. | ||
− | # Last but not least you have to copy the firmware files to <code><nowiki>/lib/firmware</nowiki></code> by | + | # Last but not least you have to copy the firmware files to <code><nowiki>/lib/firmware</nowiki></code> by<pre><nowiki>sudo cp -p -f zd1201*.fw /lib/firmware |
− | <pre><nowiki>sudo cp -p -f zd1201*.fw /lib/firmware | + | |
</nowiki></pre>Now plugin your WLAn adapter. <code><nowiki>iwconfig</nowiki></code> should list the adapter in it's output. | </nowiki></pre>Now plugin your WLAn adapter. <code><nowiki>iwconfig</nowiki></code> should list the adapter in it's output. | ||
[[category:UbuntuHelp]] | [[category:UbuntuHelp]] |
2007年12月6日 (四) 11:02的版本
文章出处: |
https://help.ubuntu.com/community/WifiDocs/Device/Topcom_Skyracer_USB_4001g_%28WLAN-USB-Stick%29 |
Topcom Skyracer USB 4001g (WLAN-USB-Stick)
- USB: USB 2.0
- Encryption types: 128bit WEP;64bit WEP;WPA-PSK
- WLAN: IEEE 802.11b;IEEE 802.11g
- Max. bandwidth: 54Mbps
Installation
- Check if zd1201 module is already loaded by typing the following command in a terminal:
sudo lsmod | grep zd1201
zd1201 22660 0 usbcore 130692 4 zd1201,ehci_hcd,uhci_hcdIf the output is empty you have to load the module by the following: type
uname -r
, the output shows your kernel version. Now you have to edit (sudo gedit <filename>
or some editor of your choice as root) the following three files:/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.aliasReplace VERSION_OUTPUT_OF_COMMAND_ABOVE with the output of the/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.dep
/lib/modules/VERSION_OUTPUT_OF_COMMAND_ABOVE/modules.usbmap
uname -r
command. In your editor addat the bottom of the file, if the phrase isn't in there yet.zd1201
- Now download the 1201 Firmware from Sourceforge.net, unpack (
tar -xzvf
) zd1201-<version>-fw.tar.gz to/tmp
and change working directory viacd /tmp/zd1201-<version>-fw
. - Last but not least you have to copy the firmware files to
/lib/firmware
bysudo cp -p -f zd1201*.fw /lib/firmware
iwconfig
should list the adapter in it's output.