Docker:修订间差异
来自Ubuntu中文
跳到导航跳到搜索
小 →参考地址 |
小 →参考地址 |
||
第62行: | 第62行: | ||
## pipework br0 -i eth1 test4 192.168.1.11/[email protected] | ## pipework br0 -i eth1 test4 192.168.1.11/[email protected] | ||
# pipework br0 -i eth1 test4 192.168.1.11/24 | # pipework br0 -i eth1 test4 192.168.1.11/24 | ||
== 安装私有仓库 == | |||
服务器上直接安装: | |||
sudo apt-get install -y build-essential python-dev libevent-dev python-pip liblzma-dev | |||
sudo pip install docker-registry | |||
通过 Docker 安装 | |||
sudo docker run -d -p 5000:5000 registry | |||
== 参考地址 == | == 参考地址 == | ||
第74行: | 第84行: | ||
http://www.linuxidc.com/Linux/2015-02/113783.htm | http://www.linuxidc.com/Linux/2015-02/113783.htm | ||
https://yeasy.gitbooks.io/docker_practice/content/repository/local_repo.html | |||
== 其他客户端初始命令 == | == 其他客户端初始命令 == |
2016年12月29日 (四) 09:42的版本
安装
sudo apt-get install apt-transport-https ca-certificates sudo apt-key adv \ --keyserver hkp://ha.pool.sks-keyservers.net:80 \ --recv-keys 58118E89F3A912897C070ADBF76221572C52609D echo "deb https://apt.dockerproject.org/repo ubuntu-xenial main" | sudo tee /etc/apt/sources.list.d/docker.list sudo apt-get update sudo apt-get install linux-image-extra-$(uname -r) linux-image-extra-virtual sudo apt-get install docker-engine sudo service docker start
安装 portainer 面板
docker run -d -p 9000:9000 portainer/portainer
安装网络
git clone https://github.com/jpetazzo/pipework.git sudo cp ./pipework/pipework /usr/local/bin/ sudo apt-get install iputils-arping bridge-utils -y # 注意配置这个会断网 sudo brctl addbr br0 sudo ip addr add 192.168.1.4/24 dev br0 sudo ip addr del 192.168.1.4/24 dev eno1 sudo ip link set dev br0 up sudo brctl addif br0 eno1 sudo ip route del default sudo ip route add default via 192.168.1.1 dev br0
# echo 'DOCKER_OPTS="-b=br0"' >> /etc/default/docker # 设置这个需要关闭掉默认的 docker0 ,否则默认还是会走这个。 sudo docker ps sudo pipework br0 test1 192.168.1.10/24
主机网络配置参考
cat /etc/network/interfaces
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eno1 #iface eno1 inet dhcp auto br0 iface br0 inet static address 192.168.1.233 netmask 255.255.255.0 gateway 192.168.1.3 bridge_ports eno1 bridge_stp off dns-nameservers 192.168.1.3 192.168.1.2
# 可以指定容器的网络网关为服务器的IP,当然也可以不用指定,直接使用内部默认的网关172.17.0.1。 ## pipework br0 -i eth1 test4 192.168.1.11/[email protected] # pipework br0 -i eth1 test4 192.168.1.11/24
安装私有仓库
服务器上直接安装:
sudo apt-get install -y build-essential python-dev libevent-dev python-pip liblzma-dev sudo pip install docker-registry
通过 Docker 安装
sudo docker run -d -p 5000:5000 registry
参考地址
https://docs.docker.com/engine/installation/linux/ubuntulinux/
http://portainer.io/install.html
https://toutiao.io/posts/496585/app_preview
https://opskumu.gitbooks.io/docker/content/chapter6.html
http://www.linuxidc.com/Linux/2015-02/113783.htm
https://yeasy.gitbooks.io/docker_practice/content/repository/local_repo.html
其他客户端初始命令
sed -i "s/archive.ubuntu.com/mirrors.163.com/" /etc/apt/sources.list apt-get update apt-get install net-tools iputils-ping