特殊:Badtitle/NS100:Dhcp3-server:修订间差异

来自Ubuntu中文
跳到导航跳到搜索
Wikibot留言 | 贡献
新页面: {{From|https://help.ubuntu.com/community/dhcp3-server}} {{Languages|UbuntuHelp:dhcp3-server}} == Dynamic Host Configuration Protocol (DHCP) == The Dynamic Host Configuration Protocol (DHC...
 
Wikibot留言 | 贡献
无编辑摘要
 
第139行: 第139行:
</nowiki></pre>
</nowiki></pre>
----
----
[[category:CategoryDocumentation]]


[[category:UbuntuHelp]]
[[category:UbuntuHelp]]

2009年5月12日 (二) 16:24的最新版本

{{#ifexist: :Dhcp3-server/zh | | {{#ifexist: Dhcp3-server/zh | | {{#ifeq: {{#titleparts:Dhcp3-server|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:Dhcp3-server|1|-1|}} | zh | | }}

Dynamic Host Configuration Protocol (DHCP)

The Dynamic Host Configuration Protocol (DHCP) is a network service that enables host computers to be automatically assigned settings from a server as opposed to manually configuring each network host. Computers configured to be DHCP clients have no control over the settings they receive from the DHCP server, and the configuration is transparent to the computer's user.

Installation

At a terminal prompt, enter the following command to install dhcpd:

sudo apt-get install dhcp3-server

You will probably need to change the default configuration by editing /etc/dhcp3/dhcpd.conf to suit your needs and particular configuration. You also need to edit /etc/default/dhcp3-server to specify the interfaces dhcpd should listen to. By default it listens to eth0.

Configuration

The error message the installation ends with might be a little confusing, but the following steps will help you configure the service: Most commonly, what you want to do is assign an IP address randomly. This can be done with settings as follows:

nano -w /etc/dhcp3/dhcpd.conf
# Sample /etc/dhcpd.conf
# (add your comments here) 
default-lease-time 600;
max-lease-time 7200;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
option routers 192.168.1.254;
option domain-name-servers 192.168.1.1, 192.168.1.2;
option domain-name "mydomain.example";

subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.10 192.168.1.100;
range 192.168.1.150 192.168.1.200;
} 

This will result in the DHCP server giving a client an IP address from the range 192.168.1.10-192.168.1.100 or 192.168.1.150-192.168.1.200. It will lease an IP address for 600 seconds if the client doesn't ask for a specific time frame. Otherwise the maximum (allowed) lease will be 7200 seconds. The server will also "advise" the client that it should use 255.255.255.0 as its subnet mask, 192.168.1.255 as its broadcast address, 192.168.1.254 as the router/gateway and 192.168.1.1 and 192.168.1.2 as its DNS servers. If you need to specify a WINS server for your Windows clients, you will need to include the netbios-name-servers option, e.g.

nano -w /etc/default/dhcp3-server
option netbios-name-servers 192.168.1.1; 

dhcp3-server and multiple interfaces

multiple interfaces example

Interface

nano -w /etc/network/interfaces
auto lo
iface lo inet loopback

mapping hotplug
        script grep
        map eth1

iface eth1 inet dhcp

auto eth0
iface eth0 inet static
    address 10.152.187.1
    netmask 255.255.255.0

auto wlan0
  iface wlan0 inet static
    address 192.168.1.1
    netmask 255.255.255.0
    up     /sbin/iwconfig wlan0 mode TTTTTT && /sbin/iwconfig wlan0 enc
restricted && /sbin/iwconfig wlan0 key [Y] XXXXXXXX && /sbin/iwconfig
wlan0 essid SSSSSSSS

auto eth1

Select Interface card

nano -w /etc/default/dhcp3-server
INTERFACES="wlan0 eth0"

Configure Subnet

nano -w /etc/dhcp3/dhcpd.conf
ddns-update-style none;
log-facility local7;

subnet 192.168.1.0 netmask 255.255.255.0 {

        option routers                  192.168.1.1;
        option subnet-mask              255.255.255.0;
        option broadcast-address        192.168.1.255;
	option domain-name-servers      194.168.4.100;
        option ntp-servers              192.168.1.1;
        option netbios-name-servers     192.168.1.1;
        option netbios-node-type 2;
        default-lease-time 86400;
        max-lease-time 86400;

        host bla1 {
                hardware ethernet DD:GH:DF:E5:F7:D7;
                fixed-address 192.168.1.2;
        }
        host bla2 {
                hardware ethernet 00:JJ:YU:38:AC:45;
                fixed-address 192.168.1.20;
        }
}

subnet  10.152.187.0 netmask 255.255.255.0 {

        option routers                  10.152.187.1;
        option subnet-mask              255.255.255.0;
        option broadcast-address        10.152.187.255;
        option domain-name-servers      194.168.4.100;
        option ntp-servers              10.152.187.1;
        option netbios-name-servers     10.152.187.1;
        option netbios-node-type 2;

        default-lease-time 86400;
        max-lease-time 86400;

	host bla3 {
                hardware ethernet 00:KK:HD:66:55:9B;
                fixed-address 10.152.187.2;
        }
}

Check Route

route -n
Destination   Gateway      Genmask    Flags Metric  Ref Use  Iface
192.168.1.0   0.0.0.0   255.255.255.0   U     0      0   0   wlan0
82.16.TT.0    0.0.0.0   255.255.255.0   U     0      0   0   eth1
10.152.187.0  0.0.0.0   255.255.255.0   U     0      0   0   eth0
0.0.0.0       82.16.TT.UU  0.0.0.0      UG    0      0   0   eth1