查看“Docker”的源代码

== 安装 ==
 sudo apt-get install apt-transport-https ca-certificates
 sudo apt-key adv \
               --keyserver hkp://ha.pool.sks-keyservers.net:80 \
               --recv-keys 58118E89F3A912897C070ADBF76221572C52609D
 echo "deb https://apt.dockerproject.org/repo ubuntu-xenial main" | sudo tee /etc/apt/sources.list.d/docker.list
 sudo apt-get update
 sudo apt-get install linux-image-extra-$(uname -r) linux-image-extra-virtual
 sudo apt-get install docker-engine
 sudo service docker start

== 安装 shipyard 面板 ==
 curl -s https://shipyard-project.com/deploy | bash -s

== 安装网络 ==
 git clone https://github.com/jpetazzo/pipework.git
 sudo cp ./pipework/pipework /usr/local/bin/
 sudo apt-get install iputils-arping bridge-utils -y
 
 #注意配置这个会断网
 sudo brctl addbr br0
 sudo ip addr add 192.168.1.4/24 dev br0
 sudo ip addr del 192.168.1.4/24 dev eno1
 sudo ip link set dev br0 up
 sudo brctl addif br0 eno1
 sudo ip route del default
 sudo ip route add default via 192.168.1.1 dev br0
 #echo 'DOCKER_OPTS="-b=br0"' >> /etc/default/docker

 sudo docker  ps
 sudo pipework br0 551088badf9d 192.168.1.10/24

== 主机网络配置参考 ==
<pre>
~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#auto eno1
#iface eno1 inet dhcp

auto br0
iface br0 inet static
    address 192.168.1.233
    netmask 255.255.255.0
    gateway 192.168.1.3
    bridge_ports eno1
    bridge_stp off
    dns-nameservers 192.168.1.3 192.168.1.2
</pre>

== 常用地址 ==

https://docs.docker.com/engine/installation/linux/ubuntulinux/

https://github.com/shipyard/shipyard

https://toutiao.io/posts/496585/app_preview

https://opskumu.gitbooks.io/docker/content/chapter6.html

== 其他客户端初始命令 ==
 sed -i "s/archive.ubuntu.com/mirrors.163.com/" /etc/apt/sources.list
 apt-get update
 apt-get install net-tools iputils-ping