个人工具
登录
查看“UbuntuHelp:FujitsuStylisticST4000”的源代码 - Ubuntu中文
UbuntuHelp
讨论
查看源代码
历史
搜索
导航
首页
最近更改
随机页面
页面分类
帮助
编辑
编辑指南
沙盒
新闻动态
字词处理
工具
链入页面
相关更改
特殊页面
页面信息
查看“UbuntuHelp:FujitsuStylisticST4000”的源代码
来自Ubuntu中文
←
UbuntuHelp:FujitsuStylisticST4000
跳转至:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您所请求的操作仅限于该用户组的用户使用:
用户
您可以查看与复制此页面的源代码。
==== Configuring WLan ==== As some devices contain a Prism2.5 WLan, you need to take the following steps to get WPA-PSK Working: '''''Attention: These steps make you flash your Wlan Hardware. I do not take any resposibility if it does not work. Use your brain from this point on!''''' The wireless chipset is a well known Intersil Prism 2.5. It supports WPA and WPA2 in Windows. However the hostap driver supports WPA/WPA2 on it only with a firmware update. [http://linux.junsun.net/intersil-prism/] is an excellent reference for this. Use hostap_diag wlan0, the firmware version is: NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash)) PRIID: id=0x0015 v1.1.0 STAID: id=0x001f v1.4.1 (station firmware) Read the release ID table carefully in the hardware model information. I picked the stable firmware from Jun Sun's firmware collection: pk010101.hex rf010704.hex Flashing is done via the program '''prism2_srec''' The new firmware works like a charm and its version is: NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash)) PRIID: id=0x0015 v1.1.1 STAID: id=0x001f v1.7.4 (station firmware) For the wpa_supplicant.conf, I followed this HowTo: [http://ubuntuforums.org/showthread.php?t=263136]. When in doubt, you can run the wpa_supplicant command manually and enable verbose output: sudo wpa_supplicant -Dwext -i wlan0 -c/etc/wpa_supplicant.conf Steps taken from: [http://offtopic.org/twiki/bin/view/Main/GadgetTabletST4110]
返回至
UbuntuHelp:FujitsuStylisticST4000
。